Tips & Tricks #1

This blog is going to be a mix of tips from various sources and things I’ve discovered in my years of sewing. I will be doing this periodically  so as not to overwhelm you with too much information.

The one thing I found to be true is, work with the best tools you can if you want a quality product in the end. Your project will only be as good as your weakest product in your project.

One stabilizer does not fit all situations!!! Check out my blog on how to use stabilizers for the best outcome of machine embroidery.

The old adage … Measure twice (or 3 times to be sure) and cut once. It also helps to read the instructions over before your start your project. (:-)

If you want to make a quilt that will be an heirloom to hand down, be sure to use good quality cotton fabric from a quilt store locally or online. Don’t go for cheap fabric, as it won’t last. Use cheaper fabric for projects that will be considered “disposable” in time.

Check your tension and make sure that your threads are sewing evenly through your fabric. Especially when quilting through two layers of fabric and batting. You may need to loosen the tension or tighten it depending on your machine and thread. Make a sample sandwich and test on that before starting on the real quilt.

Always use good quality threads for any sewing project but particularly for quilting and embroidery.  Again, you are only as good as your weakest link. Don’t let that weak link be thread that shreds or breaks all the time. I personally like Aurafil for sewing and piecing and King Tut by Superior threads, or Sulky 30w for  machine quilting.

Don’t forget to start with a new Quilting needle, preferably 90/14, when you start machine quilting a new quilt. The same goes for embroidery, a new embroidery needle will make the project go smoother.

If your thread keeps shredding or breaking, try this; Change your needle, re-thread the top thread and reset your bobbin. Most times this will take care of the problem. If it doesn’t, clean out your machine. Another thing you can do is take a cotton ball and rub it against the bobbin case, throat plate or even the needle to see if there is a burr that could cause breakage or shredding.

I am constantly saying to my students, they spend thousands of dollars on these beautiful new sewing/embroidery machines that do everything imaginable, then scrimp on supplies. Good machines need good thread, needles and fabric to run efficiently.

Periodically, I’ll be giving you more blogs with tips. If you have a neat tip I can pass on, I’m sure my readers would enjoy hearing it. One reader commented on the blog about metallic thread. She said she uses Floriani metallic and has no trouble with breakage. Nice tip!

Until next time, Happy Sewing!

Be sure to check out past blogs to see some interesting articles about sewing, embroidery and quilting.

PLEASE SCROLL DOWN TO SEE PAST BLOGS OR CLICK ON THE “PAST BLOGS” LINK ON THE RIGHT.

 

 

Advertisements

Author: Sewing Scoupe

I'm a lady who has had a passion for sewing since I was a child. I love to quilt, to make sewing crafts and I LOVE to machine embroidery. Would love to hear from you about what you like to sew. Also hope to answer any questions you may have and would love suggestions for topics for my blog.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s